Plug n Play IP Camera w/ Motion Detector 
Now
you can easily set up a camera that you can view from anywhere in the world on
the internet. The IC202W is the worlds first true plug and play
MPEG4 IP camera. It is loaded with features yet easy to install.
You do not have to worry about DDNS settings and IP mapping as you do
with other internet cameras. You
have easy access to the camera via the internet with the included Camview
software that allows you to control up to 16 cameras.
The camera has a built in web server with enhanced MPEG4-compression.
The resolution is 640 x 480 pixels.
The frame rate is 30 fps (frames per second) in all resolutions.
The IC-202W also has a built in microphone for audio monitoring.
In addition it can notify you via email when events triggered by video
motion detection occur. Online
firmware updates are provided free of charge when they become available.
In unicast mode you can have up to 4 users simultaneously viewing the
camera; in multicast mode you can have unlimited users. SPECIFICATIONS: The
IC202/w IP Camera provides both wireless IEEE 802.11 B/G and wired Ethernet
network interfaces for flexible installation. It supports the WEP and WPA (Wi-Fi
Protected Access) security modes to provide the best security for wireless
networks. The wired network
interface is the standard RJ45 Ethernet 10BaseT/100 BaseTX.
The wireless modes supported are infrastructure and ad-hoc.
The included antenna gain is 1.8 dBi.
The IC-202W supports the following protocols: web management Userid and
Password Protection and video display ID/ Password Protection in all modes.
Wireless mode supports WiFi, WEP, and WPA security mode. The
hardware requirements are a Pentium 4 Cpu, 1.0 GHz or higher or AMD equivalent
running Microsoft Windows XP SP2 or above and Framework 2.0, 256 MB RAM, and 35
MB of hard drive space, CDROM and 1 free port on your router.
The viewing angle for the lens is 63 degrees with a light sensitivity is
1 lux. The camera is powered by the
included DC 5v 1A power supply. It measures in at 4.92 inches x 2.95 inches x
1.38 inches excluding the bracket. The
camera weighs 0.6 pounds (including the bracket but not the adapter).
The IC-202W includes camera, adaptor, id/password card, antenna, 5 feet
of RJ45 cable, bracket, quick
installation guide, manual and CD. You
can view this camera (up to 16) using any computer that has Camview software
installed. The software on CD will be included with the camera however if you
would like someone at a different location to be able to view the cameras and
you do not want to send them the CD you can send them the link below: http://www.swpictures.com/IC202W/CamView.zip
Product review
+ Share your thoughts with other customers. (click to expand)
